Flanged PN16 Tied Rubber Bellows - High Temperature Water
High Temperature Water Expansion Tied Bellows Flanged PN16
Flanged and Tied PN16 Bellow/Flexible Joint
Tied E.P.D.M. rubber bellows with high tensile cord reinforced body and steel reinforced collar. Fitted with zinc plated carbon steel oval flanges complete with fully threaded tie bars and rubber top hat washers. Drilled to BS. 4504 NP16.
This tied rubber bellows is designed to accommodate misalignment and lateral movement. They are also used to reduce noise and vibration from pumps and reciprocating machinery. The high tensile cord reinforced body allows the EJ9833 to be used on heating systems and engine cooling applications or where extended service life is required.
This expansion bellow is a flexible unit suitable for use on hot water systems up to 90°C (intermittent peaks up to 120°C). It is manufactured from EPDM with high tensile cord, reinforced body and steel reinforced collar. Fitted with zinc plated carbon steel swivel PN16 flanges.
Rubber expansion joints are the perfect solution for pipe systems to absorb movements, vibrations or noise, resulting in the significantly prolonged service life of the pipe work and connected equipment. The flanges are supplied in the swivel version, for ease of fitting.
Suitable for temperatures up to 90°C the bellow rubber is EPDM. For liquids that have oil or fats we can supply NBR bellows.
Rubber Bellows are primarily used on pumps, chillers, and other reciprocating machinery to reduce noise and vibration. They are a critical part of any pumping system as they provide the flexibility necessary to absorb system movements associated with vibration. Rubber bellows are also known as rubber expansion bellows and have the capability of compensating for small amounts of axial, lateral and angular pipe work movement and therefore makes them suitable for small installation misalignments. However, rubber bellows should not be used like a metal expansion joint to compensate for thermal pipe movement and for these types of application we would always recommend a specifically designed stainless steel expansion joint.
Rubber bellows are an important part of any heating or chilled water system and should be inspected regularly as part of a maintenance program and consideration given to keeping a number of spares to reduce the risk of long term shut down.
- Tied Flanged PN16
- Rated 10 bar
- -10°C to + 90°C
- 120°C intermittent
- EPDM Bellow
- NBR Options on request
- 32mm to 100mm (1 1/4" to 4") (larger sizes on request)
The following downloads are available for the Flanged PN16 Tied Rubber Bellows - High Temperature Water: